Skip to content
Music Pitch Changer

How to use Music Pitch Changer

A walk through everything the extension does, in the order you will meet it.

Music Pitch Changer moves any song playing in Chrome up or down by semitones while the tempo stays exactly where it was — so you can sing along in a key that fits your voice.

Up and running in a minute

  1. Pin the icon. Click Extensions, the puzzle piece in the Chrome toolbar, and pin Music Pitch Changer so its icon is always in reach.
  2. Play a song. Play something on YouTube, Spotify or any other site with audio, and leave it playing.
  3. Press − or +. Click the icon and move the key a semitone at a time. The tempo does not change, and the song keeps playing.

That is all you need to sing along. Everything below is a reference — open the one part you need, when you need it.

A click on the icon opens a small window over the page — the quick window, called “Quick controls” in Settings. It holds the one thing you need most often: the key. Everything in it works while the song keeps playing.

What is in the window

The numbers match the circles on the drawing.

  1. The icon, and the number on it. Every tab keeps its own key, and the icon shows it as “+2” or “−3”. At the original key there is no number at all. The icon turns grey on pages where nothing can be changed, such as Chrome’s own pages.
  2. Original. Puts the key and the tuning back to zero. It leaves the speed alone.
  3. − and +. One click is one semitone, as far as twelve down or twelve up. One click per step: holding the button does not repeat it.
  4. The gauge. An arc from −12 on the left to +12 on the right, zero at the top, one dot per semitone and a knob on the key you are in. Click or drag along it to jump straight to a key; the arrow keys move it too. It runs green near the original and turns amber, orange and finally red at an octave — that is how far you have travelled, not a verdict on the sound.
  5. The number and the words. Under the number the shift is spelled out: “Original key”, “Half step higher”, “Whole step lower”, “An octave higher”, “5 semitones lower”. Tuning, if you have set any, is added after it as “+20 ¢”.
  6. Natural voice. A rule under the words, then the switch. Its hover tip reads “Voices don’t turn cartoonish when the key changes.” It starts off; turn it on for big shifts. More about it in delay and sound quality.
  7. Open studio. “Loop, speed and tuning, beside the page.” It opens the side panel and closes this window.

The rest of the window

  • The badge in the header says how the sound is being handled right now, and it is worth knowing all four:
    • “No delay” — the sound is prepared ahead of the video.
    • “Processing” — the key is being changed live, with a short delay.
    • “Waiting” — the extension has found nothing to work on yet: nothing is playing, or the page has no audio or video. Press play and it changes by itself.
    • “Can’t change” — something is in the way on this page. The line at the bottom of the window says what.
  • The line under the header shows the song that is playing and the site it comes from. With nothing to work on it reads “Open a page with video or music” or “Play a video or music on the page”.
  • A line at the very bottom appears only when something is in the way — for example “Press play on the page” or “Click anywhere on the page once to start”. In normal use there is nothing there.
  • The gear opens the settings in a browser tab. Chrome’s own right-click menu on the icon has an “Options” item that goes to the same place.
  • Five stars at the bottom. A card headed “Enjoying Music Pitch Changer?” turns up once you have set a key by hand on two different songs across two different days. Four or five stars open the extension’s reviews in the Chrome Web Store; one to three open a short form on this site instead, so the complaint reaches us and not the store. “Not now” puts the card away for another four days of use, and after any star it never comes back.
  • Not in this window: speed, tuning, “Loop section”, “Listen to original” and “Remember this song’s key”. They all live in the studio.

The studio is Chrome’s side panel: it stays open next to the page instead of closing the moment you click. It belongs to the browser window, follows whichever tab is in front and controls that one tab. Open it with “Open studio”, or set the icon to open it straight away, or give it a keyboard shortcut of your own.

Key, and tuning to your instrument

The key card is the one from the quick window. Under it sits a folded row, “Match your instrument”: open it and the tuning below appears, and it stays open after that.

  1. The same key card. − and +, the gauge, the number, the words and “Original”, exactly as in the small window.
  2. Less than a semitone. The slider under this label runs fifty cents either way, one cent at a time — a hundred cents make one semitone. Use it when a recording is slightly out of tune with your instrument rather than in another key.
  3. The reading. It says where A ends up: “−32 ¢ · A = 432.0 Hz”. The figure assumes the recording itself is tuned to A = 440 Hz.
  4. Five tuning buttons. 432, 435, 440, 442 and 443 Hz, with 440 in the middle. One press moves the tuning so that A lands on that pitch. 440 Hz is the standard, 442 Hz is used by most European orchestras, 443 Hz in Germany and Austria, 435 Hz is the old diapason normal and 432 Hz the alternative tuning.
  5. The hint underneath follows the slider: at zero it reads “100 ¢ is one semitone. A sounds as 440 Hz; move it if the recording isn’t in tune with your instrument.”, and once you move it, “A 440 Hz now sounds as 432.0 Hz. Match it to your instrument’s tuning.”

What is playing, and the section loop

One card, read from the top: the song, the timeline, the transport, then the loop. The studio drives the site’s own player, so you never have to go back to the page to rewind a phrase.

  1. The song. The site’s icon, the title of what is playing and the address of the site it comes from.
  2. The timeline. Click or drag it to move through the song; the left and right arrow keys step five seconds. Elapsed and total time sit under it. A live stream with no known length cannot be moved through this way.
  3. Play, and five seconds either way. Three buttons with no words on them: the double chevrons jump five seconds back and forward — their hover tips read “Back 5 seconds” and “Forward 5 seconds” — and the round one between them plays or pauses.
  4. The loop row. “Loop section”, with the switch that turns it on and a “Clear” that appears as soon as A or B is set. While repeat is on, the song jumps back to A every time it reaches B; the volume eases down before the end of the section and eases back in after the start, so you can sing or play across the join. On a short section, or with the song sped up, that fade is shorter. Move the playhead from the studio to B or past it and repeat switches off, keeping the section, so the loop does not drag you back; move it on the site’s own player and the loop is left alone.
  5. The section scale. A zoomed view of the loop with a flag at each end. Drag a flag to move one end, drag the middle to slide the whole section, or drag across empty track to pick a new one — which also turns repeat on. A click without a drag just moves the playhead. The arrow keys nudge a flag by 0.1 s, or 1 s with Shift, and a section is never shorter than half a second. While nothing is set it reads “Drag across the scale to pick a section”.
  6. A and B. Press A where the section should start and B where it should end; each button shows a “+” while it is empty and the time once it is set. A point that lands within 0.05 s of a whole or half second snaps to it, and is never carried further than that; the arrow keys on a flag set a point exactly where you want it, past the snap. It helps you hit the button, not line the section up with the bars. The snap never pulls one point towards the other: it stays off rather than leave a section shorter than half a second. And if the section would come out shorter than that anyway, the point you have just set is pushed out to exactly half a second from the other one, so a press moves the point instead of doing nothing. Put B before A and they swap themselves. As soon as both points exist, repeat switches on by itself.

A loop is not saved: it belongs to the page you are on and goes when the page reloads.

Speed

Slow a solo down to hear it, then put it back up. The key stays where you set it the whole time, and the value in the card’s corner says where you are.

  1. The slider. From 0 to 200%, with 100% in the middle and one percent per step. Players and the engine work from 25%, so the low end snaps: between 12.5% and 25% it settles on 25%, and under 12.5% it goes to 0, which pauses the song and makes the value read “Pause”. Choosing any speed from there starts it again.
  2. The presets. 50%, 75%, 100%, 125% and 150%, one click each.
  • In “No delay” mode the extension’s own engine stretches the sound; everywhere else the browser changes the speed and keeps the pitch. Either way the key you chose stays put.
  • At 100% the site’s own speed menu is left alone, and the studio shows whatever the site is using.
  • Unlike the key, a speed is not saved with the song.

Three switches

The card at the foot of the studio. Each row is just a name and a switch; the explanations below are the hover tips the extension shows. Under the card sits a line that tells you how the sound is being handled, and the gear slides the settings in over the panel with a back arrow in place of the logo.

  1. Natural voice. Hover tip: “Voices don’t turn cartoonish when the key changes.” Switching it here also sets how tabs you open afterwards start out.
  2. Listen to original. Hover tip: “Turn processing off for a moment to compare.” The sound goes round the engine untouched while it is on. It is not saved: it is there for an A/B check.
  3. Remember this song’s key. Hover tip: “Next time this song plays, it comes back in this key.” The row only appears when the extension recognises a song on the page. Switching it off is how you make the extension forget one song — see it remembers your key.

Three combinations that work with both windows closed — in a full-screen video too, which is where they earn their keep.

The three defaults

Alt+Shift+↑Key one semitone higher
Alt+Shift+↓Key one semitone lower
Alt+Shift+0Back to the original key — the key and the tuning both go to zero
  • A label over the video. Each press puts a small “Key −2”, “Key +3” or “Original key” at the top of the picture for about a second, in full screen as well. The same label appears when a remembered key comes back.
  • Whole semitones only. Up and down move the key by one semitone and leave the tuning untouched; only “back to the original” clears it too.
  • They do more than change the key. Every press saves the key for that song, switches the extension on for the tab, and updates the number on the icon. On the sites where the sound has to be taken from the tab, a shortcut is also what lets Chrome hand that sound over.
  • Changing them. Open chrome://extensions/shortcuts in the address bar. Settings has a “Change” button that takes you straight there.
  • A shortcut for the studio. “Open the studio” is in that same list, with no keys given to it. Assign a combination there and the side panel opens without the mouse.

One press of Alt+Shift+↓: the label over the picture and the number on the icon. The label fades after about a second and leaves nothing behind.

Set a key on a song once and it comes back in that key the next time you play it — with no window open, because the extension switches itself on for the tab. Everything it remembers stays on your computer.

How a song is recognised

  • YouTube and YouTube Music: by the video’s id, so the same video has the same key on both. A page with no video — the home page, a search, a channel — is not a song.
  • The Spotify web player: by the artist and the title together.
  • Everywhere else: by the page’s address, without anything after “?” or “#”. A player that plays many tracks at one address therefore shares one key between all of them.

When a key is written down

  • After a change you made yourself: the gauge, − and +, “Original”, the tuning slider, a tuning button or a keyboard shortcut. Only the semitones and the cents are kept.
  • It is written four tenths of a second after your last move, so a quick run of clicks counts as one.
  • A key that was only restored, or taken from “My key”, is not written again.
  • “Original” saves a zero for that song, which is not the same as forgetting it: next time it will deliberately start at the original key.
  • Up to two thousand songs are kept, and the oldest are dropped when the list fills. Nothing is written in an incognito tab, and nothing is sent anywhere.

Forgetting one song, and what new songs do

  1. To forget one song: play it, open the studio and switch “Remember this song’s key” off. The key playing right now stays as it is, later changes to this song are not saved, and if “My key” for the site had been set on this very song it is dropped as well. Switch it back on and the key that is playing is saved again. There is no “forget everything” button: to clear the lot, remove the extension or clear its data in Chrome.
  2. New songs start in… a setting with two answers. “My key on each site” — the default — starts a song you have never touched in the last key you set by hand on that site, quietly, with no label over the video. “The original key” starts it exactly as recorded.

“My key” is one key per site, the last one you set by hand there. YouTube and YouTube Music count as one site, and a −2 you set on YouTube does not follow you to a news page.

Any page with audio or video, players inside frames included. A few sites need one extra move from you, and a few are left alone on purpose — here is the honest list.

Sites the extension is ready for from the first second

On YouTube, YouTube Music, the Spotify web player, Yandex Music and Deezer a small script is in place before the page starts playing. It lets the extension pick the sound up from the very first chunk, which is what “No delay” needs, and on Spotify and Yandex Music it is also how the player is found at all, because those two play outside the page.

  • YouTube. This is where “No delay” lives: the sound is prepared ahead and played by the video’s clock, so it stays with the picture however far you shift it.
  • Ads on YouTube are shifted too. The extension does not tell an ad from a song: it is the same sound in the same player, and the key you set for the song stays on while the ad plays.
  • Spotify. Works, in real time. Right after you open the player the extension may not see the first track yet, and the window asks you to pause it and play it again.
  • Twitch. Live channels work, in real time: “No delay” does not come on there. For a stream that is fine — the player itself is seconds behind.
  • Everything else with a player. Any page with an audio or video element, real time. On a site the extension has not met before it waits for the next press of play, and says so: “If audio is already playing, pause it and play it again”.

SoundCloud, Bandcamp and Yandex Music: press the icon first

On these three the page’s own sound path is closed to the extension — SoundCloud runs its audio through a graph of its own that no second source can join, Bandcamp’s security policy will not let the engine run on its pages, and Yandex Music loads its audio from another domain, which the browser would silence. So the extension takes the sound of the whole tab instead.

  • Chrome asks for one gesture. It hands a tab’s sound over only after you have used the extension on that tab. Clicking the icon or pressing a key shortcut is that gesture, so in everyday use it happens by itself. The one case that waits for you is a key the extension wants to restore on its own: until then the window asks you to press the shortcut that changes the key on this page, naming the keys you actually have — Alt+Shift+↑ unless you have changed them on Chrome’s shortcut page.
  • Real time only. There is no “No delay” on a tab’s sound.
  • It is the whole tab. Ads and other sounds on the page come through it too, and while it is running the tab’s own output is muted, because the extension is the one playing.
  • Nothing happens until you ask. With the key and the tuning at zero the tab keeps its own sound; a speed change alone does not start the capture either.
  • Giving the sound back. “Original”, or “Listen to original”, hands the tab its own sound back at once. It also stops when you close the tab, leave the page or the stream ends.

Before you touch anything the tab still plays its own sound, and the line at the foot of the window says what will happen when you do.

What it does not touch

  • Calls and live audio. Meet, Zoom and Teams, and anything whose sound comes in live from a microphone or a camera. The window reads “Calls and live audio stay as they are”. Shifting other people’s voices would only confuse, so the extension stays out.
  • Chrome’s own pages and the Web Store. Closed to every extension: “The extension can’t work here: Chrome keeps its own pages and the Web Store closed to extensions. Open a tab with video or music”.
  • Files on your computer. A file you opened in Chrome works only after you turn on “Allow access to file URLs” for the extension in chrome://extensions.
  • Audio borrowed from another site. If the other site does not allow it, the page path stays shut: “This audio comes from another site that doesn’t allow changing it”.
  • A tab you have not asked anything of. Until you open a window, press a shortcut or a remembered key starts, nothing in the sound is changed at all.

Tabs that were already open when you installed the extension are picked up straight away, no reload needed. After the extension updates itself, though, open pages do need one: the window will ask for it and show a “Reload page” button.

The badge in the window always says which of the two ways the sound is being handled. You do not choose between them — the extension does, and changes its mind as the conditions change.

“No delay” and “Processing”

  • No delay. The sound the player has already loaded is worked on ahead of time and then played by the video’s own clock, so the voice stays with the lips however far you shift it. It needs a particular kind of stream, which in practice means YouTube and YouTube Music. While it is getting ready the window says “Preparing no-delay mode…”.
  • Processing. Everywhere else: the sound is changed as it plays, with a short delay. Where there is a picture the extension uses a lower-delay setting, because a delay would show as lips out of step — about 38 to 55 milliseconds there, against roughly 75 to 109 for an audio-only player.
  • When it falls back. “No delay” gives way to real time if the prepared sound runs out, after a jump far back in a long video, or when the video was already playing at the moment you installed the extension. A speed change in that mode costs a short dropout while the work restarts at the new position.
  • At the original key, nothing happens at all. With the key, the tuning and the speed all at their starting values the sound goes round the engine untouched: no colouring and no delay.

The badge sits in the window’s header, next to the name.

“Best”, “Light” and “Natural voice”

  1. Best. “The cleanest sound; no delay on YouTube at any speed.” The extension’s own engine, and the one that can keep the no-delay trick going while you also change the speed. This is how it starts.
  2. Light. “Less work for slow computers.” A lighter engine for a machine that struggles. With it there is no no-delay mode at any speed other than 100%, and the window tells you so: “Real time: this engine has no no-delay mode at speeds other than 100%”. The choice takes effect in tabs that are already open.
  3. Natural voice. A large shift drags the character of a voice along with it, which is what makes a lowered cover sound cartoonish. Natural voice holds that character in place. It matters most when a song is pulled down five to seven semitones: on seven test tracks lowered that far it brought the timbre measurably closer to the recording — 2.45 dB away instead of 4.06 — and attacks barely suffered. It is off until you turn it on.

The colour of the gauge — green, amber, orange, red as you move away from the original — measures distance, not damage: there is no size of shift the extension refuses or warns about.

One list, reachable three ways: the gear in the studio slides it in over the panel, the gear in the quick window opens it in a browser tab, and Chrome’s right-click menu on the icon has “Options”. Everything you change is kept on your computer and reaches open tabs at once.

Everything you can set

  1. Language. “Automatic”, which follows your browser, or one of seven: English, Русский, Español, Español (Latinoamérica), Português (Brasil), Deutsch, Français. The name of the extension and the names of the shortcuts on Chrome’s own page follow Chrome’s language instead of this setting.
  2. Theme. “System”, “Light” or “Dark”.
  3. The icon opens. “Quick controls”, the small window, which is how it starts; or “The studio, beside the page”, if the side panel is where you live.
  4. New songs start in. “My key on each site” or “The original key” — see it remembers your key.
  5. Natural voice for new songs. “Turn Natural voice on by default”, for when you always want it.
  6. Sound quality. “Best” or “Light”.
  7. Keyboard shortcuts. The line “Alt+Shift+↑ / ↓ change the key, Alt+Shift+0 goes back to the original”, and a “Change” button that opens Chrome’s shortcut page. That is how it reads with the keys as they come; on a Mac Chrome writes the same keys as signs, ⌥⇧↑, and the window always names the keys you have.
  8. Help, Privacy and the version. Links back to this site, and the number of the version you have installed.

Better to know before you go looking for it.

  • Chrome on a computer. It works in Chrome on a desktop or a laptop. Phones and tablets are out of its reach.
  • One browser tab’s sound. Not the sound of your computer, not another program, not a microphone. Each tab has its own key and its own number on the icon.
  • No downloading, recording or exporting. The sound is worked on as it plays, on your computer, and nothing is saved or sent anywhere.
  • It cannot tell you what key a song is in. It moves the key by the number of semitones you ask for; naming the key is not something it does.
  • No vocal removal, stems or equaliser, and no saved loops or set lists.
  • Twelve semitones either way, plus fifty cents. The keyboard shortcuts move whole semitones only.
  • Speed and loop are not remembered. Only the key and the tuning of a song are. Both go when the page reloads.
  • One song per address on most sites. Outside YouTube and Spotify a song is recognised by the page’s address, so a player that plays a whole list at one address keeps one key for all of it.
  • Not alongside another audio extension on the same player. A player’s sound can only be taken over once.
  • No account, no ads, no analytics in the extension. What it keeps and where, in full: Privacy.

Still stuck on something?

Tell us what happened and on which site — we read every message.